VP ICF LTD

Building an energy-efficient and long-lasting house is a real challenge for every builder.

A house must be easy and convenient to built and cost-effective to use later.

The main priority of building an enrgy-efficient house is to reduce the number of external energy sources to a minimum. Solar power and heat generated by people and home

appliances is usually enough to warm up a well-insulated and properly ventilated house.

One only needs a modest energy boost during cold winters.

Depending on the need for primary energy sources, energy-plus-houses, zero energy houses, net-zero energy houses and other houses with a low energy consumption can be considered energy-saving buildings. What they all have in common:

• Compact design and good insulation.
• Faced southwards and with a clever use of sun blinds: the placement and quality of windows, allow taking advantage of passive solar energy.
• Energy-efficient windows, including frames and panes of glass.
• Air-tightness of walls and ceilings.
• Efficient heat recovery from air going out of the building by using heat recovery ventilation systems: most of the heat is extracted from the outgoing air and used to warm up the incoming air (the heat recovery efficiency factor is over 80%).
• Renewable energy sources are used to produce hot water: solar batteries or thermal pumps provide sufficient energy.
• Energy-efficient home appliances.

The TermoBlock Silver product range is the right choice for everyone who wants to build a house on their own or use the expert advice of construction companies.

The TermoBlock Silver product range is perfect for building modern energy-efficient houses.

TermoPlokk Silver products have been designed to meet all requirements set for energy-efficient houses.

Using the L-Plokk, the A-Plokk, and EPS  100 Silver, it is easier and faster to build the foundations and floors of energy-efficient houses.

The L-Plokk is designed for use in the construction of plate foundations.

The A-Plokk is designed for use in the construction of crawlspace foundation footings.

EPS 100 Silver is designed for use in the construction of heavily loaded and well-insulated floors.

The thermal conductivity for EPS 100 Silver is lamda = 0.030 W/mK!

       Benefits:

• The foundation can be constructed without the use of planking.
• The foundation is insulated immediately and without any thermal bridges.
• Easy and convenient installation.
• Significantly fewer work hours.